85 Pint Crawl Space Dehumidifier
WatchDog NXT85c
Effortless Humidity Control with Built-In Pump
Click to view more pictures
Effortless Humidity Control with Built-In Pump
Effectively maintain up to 15,000 cubic feet
Drain up to 15' uphill
Full bumper to bumper coverage
The WatchDog NXT85c delivers an impressive performance, removing up to 85 pints of moisture per day while coverings spaces up to 15,000 cubic feet. Its compact design makes it ideal for most crawl spaces and basements without sacrificing power.
What sets the NXT85c apart is its built-in condensate pump instead of the traditional gravity drain system. The pump allows for more versatile drainage options, including the ability to pump water uphill.
The WatchDog NXT85c is designed with convenience in mind. Its built-in pump simplifies the drain line setup, eliminating the limitations of a gravity drain system. The compact, lightweight design with integrated handles makes positioning the unit straightforward, even in tight spaces. Additionally, the intuitive digital display streamlines the initial setup process, getting you up and running with minimal effort.
| Rated Condensate Capacity (80℉, 60%) | 85 PPD |
|---|---|
| COP (65°F, 60%) | 1.93 L/kWh |
| Refrigerant | R32 |
| Sound Level | 59 dBa |
| Airflow @ 0.00" Static Pressure | 185CFM |
| Drain Set Up | Built-in Pump |
| Coverage Area | 15,000 Cubic Feet |
| Weight | 60lbs |
| Dimensions | 21.7" x 12" x 12" |
| Warranty | 5 Years |
| Evaporator Coils | All Aluminum |
The W-112 Hanging Kit offers an easy solution for mounting your dehumidifier above the ground. Each kit comes with two ratchet straps and four eye hooks. It is compatible with all WatchDog crawl space models.
The X-101 remote monitoring station allows you to track the conditions of your crawl space or basement from anywhere. You can view real-time data on the included monitor or through the mobile app. However, please note that the remote monitor cannot adjust your dehumidifier settings.
The W-100 wired remote allows you to monitor and adjust your dehumidifier settings with ease. It connects using a 20-foot CAT-5 cable and includes a built-in sensor, giving you the flexibility to use either the remote’s sensor or the dehumidifier’s sensor.
The N-200 Pre-Filter is designed for NXT60, 600c, NXT85, and NXT85c dehumidifiers and comes standard with these models. Measuring 12” x 9” x 0.375”, it is washable for extended use, though occasional replacement may be needed. To maintain optimal performance, we recommend checking your dehumidifier filters at least once per year.
The N-201 MERV filter is designed specifically for 60 and 85 pint models in the NXT Series, including the NXT60, 600c, NXT85, and NXT85c. This filter comes standard with these units and is essential for maintaining optimal efficiency. To ensure your dehumidifier operates at its best, inspect the filter annually and replace it as needed.
The WatchDog NXT Carbon Filter is an optional upgrade that replaces the standard MERV-10 filter in your NXT dehumidifier (NXT60, 600c, NXT85, and NXT85c). Engineered for odor removal, the carbon filter helps reduce unwanted smells. Measuring 12” x 10” x 0.75”, it should be inspected at least once per year to maintain optimal performance
The N-202 HEPA filter is an optional upgrade designed to replace the standard MERV-10 filter in your NXT60, 600c, NXT85, or NXT85c. Known for their efficiency, HEPA filters can capture some of the smallest air particles. Measuring 12” x 10” x 0.75”, it is recommended to inspect this filter at least once a year.
The N-103 is a two piece assembly designed for installation on both the supply and return sides of the dehumidifier. Once in place, it allows for the attachment of a 10” ducting (not included). The N-103 is compatible with 60 and 85 pint NXT dehumidifier models, including the NXT60, 600c, NXT85, and NXT85c.
Our technical team is here to help you choose the right solution
Expert Advice